Kodak 2500 - Manual (Page 56)

A-63055 December 1999 50
Specifying an Area To capture a portion of an image, click on the Sub Area button in the
Front Side Settings group box or in the Back Side Settings group box
to access the Sub Area dialog box.
NOTE: The Sub Area dialog box shown above appears for the
Scanner 1500. The Sub Area dialog box shown below appears
for the Scanner 2500.
Area settings are determined by the X and Y positions and the width
and length coordinates. Set the scanning area in the Area group box
on the basis of the size specified in the
Paper Size drop-down list box.
You can also use the mouse to define the scanning area in the window.