Kenwood KVT-647DVD - Manual (Page 10)

10 | English
■ Installation on Toyota Car using Brackets at Holes shown by "●"
or
When using the bracket shown above, you cannot use screws at two holes of
the right and left unit sides. If so, tighten the bracket using accessories
0 as
shown below.
1. Use accessories 0 at both sides as shown.
Accessory 0
Audio unit or others
2. Mount the bracket at each side.
Accessory ! (M5x6mm)
Accessory ! (M5x6mm)
Screws (included in
audio unit package)
Screws (included in
audio unit package)
Car Bracket