Kohler Discovery - Manual (Page 15)

15
2. Solid Wall or Stud Partition
(Using Rear Fixing Points on Shower Control)
2.1 Refer to section: ‘1. Solid Wall or
Stud Partition Installation (Using
Securing Brackets - Mounting off
Front Face)’ and follow instructions
1 to 4.
2.2 Cut away the plasterboard or brick work
to the required depth.
Important! This depth ‘X’ will depend
on the finished wall thickness e.g. tiles
or facia board. Refer to the table for
this measurement.
For stud partitions depth ‘X’ refers to
the distance from the rear mounting
e.g. wooden baton, to the front of the
wall (before tiling).
Finished Wall
Surface
Finished Wall
Thickness
Depth ‘X’
Rear Support
Finished Wall Thickness
(e.g. tile and adhesive)
6 mm
8 mm
10 mm
12 mm
14 mm
16 mm
18 mm
20 mm
22 mm
24 mm
Wall Cutout Depth ‘X’
76 - 58 mm
74 - 56 mm
72 - 54 mm
70 - 54 mm
68 - 54 mm
66 - 54 mm
64 - 54 mm
62 - 54 mm
60 - 54 mm
58 - 54 mm