Troubleshooting guide – Kenwood KCA-R71FM User Manual

Page 24

Advertising
background image

English

— 24 —

Troubleshooting Guide

The messages shown below display your systems condition.

EJECT:

No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.

E01

➪

Load the disc magazine properly.

NO DISC:

No disc has been loaded in the disc magazine.

E02

➪

Load a disc into the disc magazine.

TOC Error:

No disc has been loaded in the disc magazine.

E04

➪

Load a disc into the disc magazine.

The CD/MD is quite dirty. The CD is upside-down. The CD is scratched a lot.

➪

Clean the CD/MD and load it correctly.

BLANK DISC:

Nothing has been recorded on the MD.

E77

➪

The next MD will automatically be played.

No Track:

No tracks are recorded on the MD, although it has a title.

E77

➪

The next MD will automatically be played.

E-12:

Now reading the data in the disc.

E77

➪

Normal playback is resumed upon completing the reading of the disc data.

E-77:

The unit is malfunctioning for some reason.

E77

➪

Press the reset button on the display unit. If the "E-77" code does not disappear, consult your nearest service center.

Mecha Error:

Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.

E99

➪

Check the disc magazine, and then press the reset button on the display unit. If the "Mecha Error" code does not
disappear, consult your nearest service center.

Hold Error:

The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F),
stopping all operation.

E0d

➪

Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C
(140°F), the disc will start playing again.

ANTENNA ERR:

The antenna is not connected correctly.

E77

➪

Make sure the antenna is connected correctly and then turn OFF/ON the SIRIUS source or Display unit.

TUNER ERROR:

Broadcast cannot be received due to an error in this unit.

E77

➪

Turn OFF/ON the SIRIUS source or Control unit, or press the reset button on the Display unit.

ESN ERROR:

The ESN (Electronic Serial Number) is not registered in Sirius satellite radio tuner unit.

E77

➪

Consult your nearest service center.

LINE ERROR:

Neither a disc changer nor the Sirius satellite radio tuner is connected.

E77

➪

Connect a disc changer or the Sirius satellite radio tuner.

The number of disc changers and Sirius satellite radio tuners exceeds the limit of connection to this system.

E77

➪

Up to two units can be connected. Rearrange your connection not to exceed the limit of the connection.

KCA-R71FM_U.S_r3 04.7.8 3:58 PM Page 24

Advertising