Konftel 50 - Manual (Page 23)

FCC STATEMENT
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
ACTA. On the bottom of this equipment is a label that contains, among other information,
a product identifier in the format US:5RWOTNAN50. If requested, this number must be
provided to the telephone company.
An applicable certification jack Universal Service Order Code (USOC) for the equipment is
provided (i.e., RJC ) in the packaging with each piece of approved terminal equipment.
A plug and jack used to connect this equipment to the premises wiring and telephone network
must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A
compliant telephone cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. See installation instructions
for details.
The REN is used to determine the number of devices that may be connected to a telephone
line. Excessive RENs on a telephone line may result in the devices not ringing in response to
an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0).
To be certain of the number of devices that may be connected to a line, as determined by
the total RENs, contact the local telephone company. [For products approved after July
3 00, the REN for this product is part of the product identifier that has the format
US:5RWOTNAN50. The digits represented by 05 are the REN without a decimal point (e.g.,
03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.]
NOTICE: If your home has specially wired alarm equipment connected to the telephone line,
ensure the installation of this Konftel 50 does not disable your alarm equipment. If you have
questions about what will disable alarm equipment, consult your telephone company or a
qualified installer.
NOTICE: According to telephone company reports, AC electrical surges, typically resulting
from lightning strikes, are very destructive to telephone equipment connected to AC power
sources. To minimize damage from these types of surges, a surge protector is recommended.
The FCC Wants you To Know
In the unlikely event that your phone causes problems on the phone line, the phone company
can temporarily discontinue your service. If this happens, the phone company attempts to
notify you in advance. If advance notice is not practical, the phone company notifies you as
soon as possible and advises you of your right to file a complaint with the FCC.
Also, the phone company can make changes to its lines, equipment, operations, or procedures
that could affect the operation of this telephone. The telephone company notifies you of
these changes in advance, so you can take the necessary steps to prevent interruption of your
telephone service.
This equipment complies with the limits for a Class B digital device as specified in Part 5
of FCC Rules. These limits provide reasonable protection against radio and TV interference in
a residential area. However, your equipment might cause TV or radio interference even when
it is operating properly. To eliminate interference, you can try one or more of the following
corrective measures: