Klipsch Car Speaker - Manual (Page 2)

SYNERGY SERIES
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wider blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. PROTECT the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit.
WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain
or moisture.
WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside.
Refer all servicing to qualified service personnel.
CAUTION: Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate this device.
ABOUT YOUR KLIPSCH PURCHASE
Thank you for your purchase of Klipsch speakers. After reading this manual and connecting your
system, you will hear the result of over 55 years of stringent engineering and class-leading
research and development. Like all Klipsch products, your speakers feature Klipsch Horn-loaded
Technology—the guiding design for the first Klipschorn
® developed in 1946 and for every
product that has followed. Horn-loading allows your speakers to deliver high sensitivity, low
distortion, flat frequency response and wide dispersion, which translates to unequaled power,
detail and dynamics, the hallmarks of “The Klipsch Sound.” Please be sure to fill out the
included Warranty card or register online at www.klipsch.com so we are better able to serve
you. Again, thank you for choosing Klipsch and we hope that your speakers bring life to your
music and movies for many years.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
GRILLE
The speaker can be used with or without its grille in place. The grille attaches magnetically;
you can remove the grille easily by pulling it forward and replace it simply by lining up its
edges with the those of the speaker cabinet.
The logo badge on the grille can be removed, rotated 90 degrees and replaced for proper ori-
entation when using the SLX in a horizontal position. To remove the logo badge, simply push
the two pins on the rear of the logo badge together and push it out of its location on the grille.
To reinsert it, align the two pins with the hole in the grille and push the logo badge into place
(making sure the orientation of the logo badge is correct).
PLACEMENT
Your Synergy SLX speakers are designed for maximum flexibility and will perform well in a
wide variety of configurations. Figure 1 shows a typical home theater setup, with a center-
channel speaker (Synergy SLX) mounted below (or above) a flat panel tv, left and right front
speakers (Synergy SLX) flanking the screen, and another pair of speakers (Synergy SLX) to the
sides of the listening area for the main surrounds. Below are specific placement recommenda-
tions for each function.
Center-Channel Speaker: Center the speaker directly above or below your tv and mount it on
the wall (see wall mounting instructions). When using the supplied mounting bracket, each
Synergy SLX can be rotated 30° (15° in each direction) to obtain optimal directivity toward the
listening area.
Front Left and Right Speakers: The front left and right speakers should be approximately in
line with your tv and equidistant from it. The distance from the tv is not critical, though wide
separation will tend to make the sound more spacious. Avoid having either speaker closer than
2 feet to a side wall. Place them at seated ear height if that is practical. When using the
supplied mounting bracket, each Synergy SLX can be rotated 30° (15° in each direction) to
obtain optimal directivity toward the listening area.
Left and Right Surround Speakers: Using Synergy SLX’s as surround speakers ensures an
acoustic and cosmetic match to the front left, right and center speakers. The best location for
speakers employed as surround speakers is on or against the walls to the sides of the seating
area, anywhere from adjacent to the listening position to about 20º behind it. Mount them
above the ear height of seated listeners (5’-7’ high) but avoid placing them up against or on
the ceiling. Aim them straight across the room or back slightly toward the rear wall for a more
diffuse sound or toward the listening position for a more direct sound. The design of the
Synergy SLX allows great flexibility and good results can be achieved with configurations that
depart significantly from the ideal. When using the supplied mounting bracket, each Synergy
SLX can be rotated 30° (15° in each direction).
Surround Back Speakers: If your electronics support Dolby Digital EX, THX Surround EX, or
DTS-ES 7.1 or 6.1-channel surround, you can place one or two speakers behind the seating
area to serve as surround back speakers. As with the left and right surrounds, the optimum
location is above seated ear level. If you are using just one back surround speaker, it should be
centered behind the listening area; if you are using two, they should be spaced fairly close
together. With this type of system, the regular left and right surrounds should be located
adjacent to the seating area rather than behind it.
S
C
FLAT
PANEL
TV
Optional
sub
L R
Figure 1
ENGLISH