Kenwood KDV-Z940 - Manual (Page 47)

— 47 —
Setting the reference point when zooming and the amount of
movement when scrolling.
Press the each the [ 5 or ∞ ] buttons to select the
“PICTURE”.
Press the [ ENTER ] button.
Press the each the [ 5 or ∞ ] buttons to select the “ZOOM
SETUP”.
Press the [ ENTER ] button.
Press the each the [ 5 or ∞ ] buttons to select the “START
POINT”.or “PAN SCALE”
Press the [ ENTER ] button.
START POINT : Sets the reference point when zooming.
Each time you press the [ 5 or ∞ ] buttons, the mode
switches as follows:
" UPPER LEFT "
Zooms with the upper left as the reference point.
" CENTER " (Default setting)
Zooms with the screen center as the reference point.
" LAST POINT "
Zooms with the previous zoomed place as the reference point.
PAN SCALE : Sets the scroll amount.
Each time you press the [ 5 or ∞ ] buttons, the mode
switches as follows:
" NORMAL " (Default setting)
The scroll amount is normal.
" ROUGH "
The scroll amount is rough.
" FINE "
The scroll amount is fine.
Press the [ ENTER ] button. 4
3
2
1
Setting the Zoom Setup
External disc control features
XOVER
AUD
DISP NAME.S MENU NF
3-D DAB PWR OFF
DSP
DISP/
NAME.S
SRC DISC+
4
DISC- SCAN
RDM
REP M.RDM
38
¢
Track number Track time
Disc title/Track title/DNPS
Disc number
Release button
Description about this indicator for these features can be displayed
by setting the Lower Part Display (page 14) to
"... + Function indicator".