Kettler DINING TABLE 2610 User Manual

Kettler Furniture

Advertising
background image

3.

2610 36” x 72” DINING TABLE

Contents:

(4) Legs

(2) Side Braces

(2) Table feet

(1) Table Top

(16) 1/4 - 20 x 2 1/2” Bolts

(4) 1/4 - 20 x 3” Bolts

Tool Required:

#3 Phillips Head Screwdriver

Assembly Instructions

1.

With the curved side facing out

align the table leg with the predrilled hole

on the foot of the table and insert a 1/4 -

20 x 3” bolt then tighten with the phillips

screwdriver.

Repeat on the other end, do both sets.

1.

Align the predrilled holes on the leg

with the metal insert on the frame,

insert the bolt.

2.

Place the leg with foot

inside the frame underneath the

tabletop. Align the predrilled

holes, insert two 14 - 20 x 2 1/2”

bolts then tighten them with the

phillips screwdriver.

Repeat on the other leg, do both sides.

3.

Place the side support braces

vertically between the legs aligning the

predrilled holes. Insert two 1/4-20 x 2 1/2”

bolts thru the hole into the center brace then

tighten them with the phillips screwdriver.

Repeat on the other brace, do both sides.

2.

Made in the U.S.A.

www.kettlerusa.com

[email protected]

Copyright

©

Kettler USA 309.01

Advertising