Kompernass KH 980 - Manual (Page 8)

- 6 -
Troubleshooting
The Universal Battery Charger displays no
functions
• Check to see if the power cable is correctly
inserted into the power socket.
• Check to see if the power socket is „live“. To do
this, connect a different, functioning electrical
appliance to the socket.
The inserted batteries are not being charged
• Check that the batteries are being inserted in
accord with their polarity.
• Check that batteries suitable for charging have
been inserted into the Universal Battery Charger.
Suitable for charging are exclusively recharga-
ble Ni-Cd and Ni-MH batteries of the types
AAA/AA/C/D and 9 V Block batteries.
• Remove the power cable from the power socket
and allow the appliance to cool down, as the
temperature monitoring has possibly activated
itself. Temperature monitoring ensures that the
charging process is broken off as soon as a bat-
tery reaches an excessively high temperature.
Other malfunctions
Make contact with one of our service partners close
to you if:
• the malfunction cannot be corrected as
described above,
• or, when operating the Universal Battery
Charger, other malfunctions occur.
Cleaning
Clean the housing of the Universal Battery Charger
only with a dry cloth. For stubborn soiling use a
lightly moistened cloth. When cleaning ensure that
no moisture can permeate into the Universal Battery
Charger! Never clean the insides of the charging
slots with moist cloths. Instead, use a clean soft
brush to clean them. Under no circumstances should
you use abrasive or chemical cleaners.
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Battery disposal!
Batteries may not be disposed of with normal
domestic waste. All consumers are statutorily obli-
ged to dispose of batteries at the collection point in
their community/district or with the original supplier.
The purpose of this obligation is to ensure that
batteries can be disposed of in an environmentally
friendly manner. Only dispose of batteries when
they are fully discharged.
Dispose of all packaging materials in an
environmentally responsible manner.
IB_KH980_E33078_LB6 28.05.2009 10:37 Uhr Seite 6