Krown Manufacturing K-EQ40 - Manual (Page 5)

SETTING UP THE EQUALIZER
FOR DESKTOP USE
1. Turn the phone upside down. Insert the two smaller tabs into the slots (see
Figure 1) and then press down on the bracketʼs top edge until the two larger
tabs snap into place.
2. Plug one end of the handset cord into the jack on the handset and the other
end to the jack on the bottom of the base unit.
3. Press the cord into the channel provided to keep it out of the way.
4. Plug one end of the supplied long telephone line cord into the jack on the
back of the base. Plug the other end into the wall phone jack.
Note: If the large tabs do not snap in easily, push slightly against the tabs
while you press down on the bracket.
FOR MOUNTING ON A WALL (Figure 2 & 3)
1. Plug one end of the handset cord into the jack on the handset and the other
end into the jack on the back of the base unit.
2. Press the cord into the channel provided to keep it out of the way.
3. Turn the phone upside down. Inset the two smaller tabs into the slots as
shown in Figure 2, then press down on the bracketʼs bottom edge until the
two larger tabs snap into place.
Note: If the large tabs do not snap in easily, push slightly against the tabs
while you press down on the bracket..
SLOTS
Smaller Tabs
Larger Tabs
SLOTS
Smaller Tabs
Larger Tabs
Figure 1
For desktop use Figure 2
For wallmount
3