Connecting to a tv with component input terminal, Connecting to an audio component, Connections – Kenwood DVF-5500 User Manual

Page 12: Prepar a tions, Dts disclaimer clause

Advertising
background image

P

repar

a

tions

12

DVF-5500

INPUT

DIGITAL INPUT

AUDIO

VIDEO

R

L

COAXIAL

OPTICAL

Connecting to a TV with Component input terminal

Connecting to a TV with Component input terminal

Audio cord

Rear panel example (for Europe)

Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic II / Pro Logic:

Connect the left and right AUDIO OUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo
system, using the audio cords.

Amplifier equipped with 2-channel digital stereo (PCM) or a multi-channel decoder (Dolby Digital™ or
DTS):

Connect one of the DVD Player's DIGITAL OUT jacks (COAXIAL/OPTICAL) to the corresponding in jack on your amplifier. Use a digital (co-
axial/optical) cable. Select "Bitstream" if you connect the DVD player to an amplifier or other equipment with a multi-channel decoder.
(See page 17.)

Component cords (Commercially available)

Video cord

TV

Connecting to an Audio component

Connecting to an Audio component

For playback of DTS audio, please connect an AV receiver or an AV amplifier which can decode DTS by digital connection.

Refer to "TV Output Select (only for Europe)" on page 17.

Rear panel example (for Europe)

Video cable or Component cords
(Commercially available)

TV

Notes:
• In case an associated system component is connected, also read the instruction manual of the component.
• If the audio format of the digital output does not match the capabilities of your receiver (amplifier), the receiver produces a strong, distorted

sound or no sound at all.

DTS disclaimer clause

When playing DTS-encoded (CDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid possible damage to
the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD player is connected to an
amplification system.
To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the digi-
tal output (S/P DIF, AES/EBU, or TosLink) of the DVD player.

Audio cord

Coaxial cable

Optical cable

AV receiver or AV Amplifier

Connections

Advertising
This manual is related to the following products: