Kenwood XD-DV90 - Manual (Page 42)

42
Operations
XD-series (EN/T,M,X)
CD Program Recording (TAPE B only)
1
Preparation
Select reveres mode ·
Select tape transport direction, then
press the STOP (
7
) key. ·
2
MAIN UNIT
Playback a disc, then press the STOP
(
7
) key.
REMOTE MAIN UNIT
REVERSE MODE
TAPE B
23
STOP
7
23
TAPE B
STOP
3
REMOTE MAIN UNIT
Edit program
4
See “Preparation” on page 40.
STOP
7
DVD/CD
STOP
6
DVD/CD
SHIFT
EQ
DVD PGM
Press the REC/ARM key
5
REMOTE
REC/ARM
MAIN UNIT
1 “ ” : The recording will end and the tape will stop at the
end in reverse direction, no matter whether record-
ing was started in forward direction or in reverse
direction.
2 “ ” : In recording mode, this is the same as “ ”.
3 “ ” : Record stops after having recorded one side of tape.
Each press switches the modes as follows
÷ If the tape transport direction is opposite to the desired direction,
press the play key corresponding to this.
Tape direction indicators of
currently selected deck.
Lit
See page 28
This unit can only use tape for the normal position (Type I).
CD Program recording is not possible for a DOLBY SURROUND disc. Please switch the listening mode to STEREO and per-
form normal recording. (See page 52)