Konica Minolta DiMAGE F100 - Manual

Technical Specifications
Number of effective pixels: 3.95 million
CCD:
1/1.8-type interline complementary-color CCD
Total pixels: 4.13 million
A/D conversion: 12 bits
Camera sensitivity: Auto, ISO 100, 200, 400, 800 equivalents
Focal length: 7.8 – 23.4mm (35mm equivalent: 38 – 114mm)
Lens construction: 8 elements in 7 groups (includes three elements
with four aspheric surfaces)
Maximum aperture: f/2.8 – f/4.7
Minimum focus distance: Wide: 0.5 m (approx. 1.6 ft.) from CCD
Telephoto: 0.5 m (approx. 1.6 ft.) from CCD
Macro focus range: 20 - 60cm (7.9 – 23.6 in.) from CCD
14.5 – 54.5 cm (5.7 – 21.5 in.) from front of lens
Maximum magnification: 0.17x (1: 5.88)
Equivalent to 0.74x (1: 1.35) in 35mm format
Area covered at maximum magnification:
18.7 x 14.1mm (0.74 x 0.56 in.)
Viewfinder type: Optical real-image zoom viewfinder
Monitor LCD: 3.8 cm (1.5 inch) low-temperature polysilicon
TFT color
Total number of pixels: 110,000
Shutter: CCD electronic shutter and mechanical shutter
Shutter speed range: 4 - 1/1000s, Bulb (max. 15s)
Autofocus system: Video AF
Autofocus areas: Wide focus area (Area AF)
Spot focus areas with Focus Area Selection
Focus modes: Autofocus: Subject Tracking AF, Single-shot AF
Full-time AF is available in the autofocus mode.
Manual focus
Focus lock: In single-shot AF and Focus Area Selection
9