Kompernass KH 31 - Manual (Page 8)

10
³
Press the release button fully in
only after about 1 or 2
seconds, so that the red LED
can take effect.
b) Flash
The flash is switched on automati-
cally, if the light conditions so
require.
ƺ
The green "flash ready" indica-
tor lights up as soon as the
flash is sufficiently charged. If a
flash has just been set off, this
can take up to 8 seconds.
c) Disabling / forcing the
flash
If you do not want the flash to be
set off automatically when you are
taking the photograph, press and
hold the ...
´
"Disable flash" button, if you
do not want the flash to go off;
º
"Force flash" button, if you
want the flash to go off, even
though there may be sufficient
light.
8. Taking the film out
After the last photograph on the
film has been used, no more
photos can be taken:
¾
Move the winder direction
switch up to the cartridge sym-
bol. The film is wound back
into the cartridge.
²
Open the back panel and take
out the film, once the film has
KH31_IB_Kamera_UK 06.04.2004 14:44 Uhr Seite 10