Kompernass KH 6508 - Manual (Page 31)


D
V
D/
V
C
D/
S
-V
C
D
Silvercrest KH 6508/KH 6509
Please note:
If you are not sure of the number of a title or chap-
ter that is to be programmed, then select the corre-
sponding chapter during fi lm playback by pressing
the “Skip”
/”Skip” button, and then press the
“Display” button on the remote control twice, to fade
in all information relating to the loaded DVD/VCDS-
VCD on the television screen. This is also where you
will fi nd, among other things, the current title and
chapter number.
➧
For this subject please refer to Chapter 11.1 “Fade-in Disc
Information”.
Programming example
You would like to enter the numbers 03 and 10 of a fi lm on
a DVD/VCD/S-VCD for programmed playback; the main fi lm
in this example has the title number one:
1 In the program menu the fi rst entry fi eld under storage
place 1 is automatically marked. Press, one after the other,
the “0” button and “1” button to enter the title number
01.
2 Press the control button once to change to the second
entry fi eld under program storage place 1.
3 Press once, one after the other, the “0” button, and once
the “3” button, to entre the chapter with the number
03.
4 Then select with the control buttons the fi rst
input fi eld under program storage place 2.
5 Press, one after the other, the “0” button and the “1” but-
ton to entre the title number 01.
6 Press once the control button to change to the second
input fi eld under program storage place 2.
7 Then press, one after the other, the “1” and “0” buttons to
entre the chapter with the number 10.
8 Having programmed the two required chapters, select
with the control buttons
the “Play Program“ op-
tion under the input fi elds. Press the “OK” button once to
start playback of the programmed chapters.
Fade-in disc information
Please note:
This function may not be available on all DVDs/VCDs/
S-VCDs! If you try to carry out a function that is not
available, then the symbol
is displayed on the tel-
evision screen.
With this function you can fade-in all available information
relating to a DVD/VCD/S-VCD loaded in the DVD Player dur-
ing playback on the television screen.
For this purpose proceed in the following manner …
1 Press during playback the “Display” button on the remote
control once. The following will be faded in on the televi-
sion screen:
• Top left: The already played time of the currently playing
DVD/VCD/S-VCD in hours, minutes and seconds.
• Top right: The remaining time until the end of the cur-
rently playing chapter in hours, seconds and minutes.
2 Press the “Display” button a second time to display the
following on the television screen:
For DVD
• The already played time of the currently playing DVD in
hours, minutes and seconds.
• The remaining time until the end of the currently playing
chapter in hours, seconds and minutes
• The type of loaded disc (DVD)
• The current title number/the total number of titles
• The current chapter number/the total number of chapters
• The currently selected camera angle/the number of cur-
rently available camera angles
• The currently set playback language
• The currently selected subtitle setting
For VCD/SVCD
• The already played time of the currently playing VCD/
SVCD in hours, minutes and seconds.
• The remaining time until the end of the currently playing
chapter in hours, seconds and minutes
• The type of loaded disc (VCD/S-VCD)
3 To fade-out the disc information press the “Display” key
once again.
Switching on diff erent play modes
Please note:
This function may not be available on all DVDs/VCDs/
S-VCDs! If you try to carry out a function that is not