Koss FIIRE REMOTE CONTROL UNIT - Manual (Page 2)

Introduction . . . . . . . . . . . . . . . . . . . . . . 2
Battery Installation and Information . . . 2
Battery Saver . . . . . . . . . . . . . . . . . . . . . 2
Gyro Operation . . . . . . . . . . . . . . . . . . . 3-4
Product Diagram. . . . . . . . . . . . . .. . . . . . 5
Button Cluster Locations. . . . . . . . . . . . . 5
RCU Mode Selection. . . . . . . . . . . . . . . . 5
Transport Control . . . . . . . . . . . . . . . . . . 6
Menu Navigation . . . . . . . . . . . . . . . . . . . 7
Fiire Menu, Media Control, Ligths and
Volume, Gyro Activation . . . . . . . . . . . . . 7
Channel/Volume Control, Mute Volume,
Gyro Stop . . . . . . . . . . . . . . . . . . . . . . . .8
Fiire Shortcut Buttons . . . . . . . . . . . . . . .9
Numeric Keypad . . . . . . . .. . . . . . . . . . . 9
Follow me, Info&Help, Connect, Input, Av
Menu . . . . . . . . . . . . . . . . . . . . 9
Backlighting . . . . . . . . . . . . . . . . . .. . . . 10
ON/OFF Switch . . . . . . . . . . . . . . . . . . . 10
Receiver Installation . . . . . . . . . .. . . . . . 10
Table Of Contents
This users’ manual describes the operation of the Fiire Chief -- Remote Control Unit
(RCU) 4-in-1 (3 IR devices + 1 RF device). The RCU contains an embedded micro
gyro for motion sensing and in-air control of floating cursor. This RCU features IR code
database and IR learning capabilities to universally control standard home theater
devices such as TVs, VCRs, Digital Video Recorders (DVR), DVD players, CD players,
cable/SAT boxes, etc.
The RCU is also equipped with a 2.4 GHz RF transceiver to send cursor movement
information and other commands to the Fiire System via a USB transceiver. The radio
frequency (RF) transceiver delivers a range of up to 100 feet with no line-of-sight
requirement. The 800 possible channels of the RF transceiver provide high resistance to
interference from other radio devices.
Before using the Fiire Chief press the connect button on the remote to bind it to the
closest USB dongle. Do not press the connect button on the dongle.
Battery Installation and Information
The Fiire Chief RCU requires two AA Alkaline batteries. To install the batteries:
1. Remove the battery compartment cover.
2. Insert the batteries, matching the batteries to the (+) and (-) marks inside the battery
compartment.
3. Replace the battery compartment cover and snap it into place.
Note: Reprogramming may be required after batteries are replaced.
Battery Saver
The RCU saves battery power by automatically going into a low-power state if no button
is pressed after a few seconds.
Product Registration Information
Keep your sales receipt to obtain warranty parts and service and for proof of purchase.
Attach it here and record the serial number in case you need it. The serial number is
located on the product.
Introduction
Model Number _______________________________
Serial Number ______________________ Purchase Date _____________
Dealer/Address/Phone ________________________________________
Setting Up and Synchronizing a Gyration
Go mouse or keyboard and the
Transceiver . . . . . . . . . . . . . . . . . . . . . 11
Programming Methods . . . . . . . . . . . . . . 11
Using Automatic Code Search . . . . . . . 11
Using Direct Entry . . . . . . . . . . . . . . . 12
Using the Remote to Control Your
Components . . . . . . . . . . . . . . . . 12
Volume Punch Through . . . . . . . . . . .. . . 12
Learning . . . . . . . . . . . . . . . . . . . . . . . . . 13
Learning Tips . . . . . . . . . . . . . . . . . . . . . 13
Code Learning . . . . . . . . . . . . . . . . . . . . 13
Learning Commands . . . . . . . . . . . . . . . 13
Clearing an Individual Learned
Function . . . . . . . . . . . . . . . . . 14
Deleting All Learned Functions . . . . . . . 14
Troubleshooting . . . . . . . . . . . . . . . . . . . 14
Remote Code List . . . . . . . . . . . . . . 15-19
2