Important safeguards – Kawasaki 19.2V BATTERY-OPERATED WORKLIGHT 840646 User Manual

Page 25

Advertising
background image

DANGER indicates an imminently hazardous
situation which, if not avoided, will result in death
or serious injury.

WARNING indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.

CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.

CAUTION used without the safety alert symbol
indicates a potentially hazardous situation which,
if not avoided, may result in property damage.

NOTE provides additional information that is useful
for proper use and maintenance of this tool. If a
NOTE is indicated make sure it is fully understood.

IMPORTANT SAFEGUARDS

People with electronic devices, such as pacemakers, should consult their
physician(s) before using this product. Operation of electrical equipment in
close proximity to a heart pacemaker could cause interference or failure of
the pacemaker.

WARNING: Some dust created by power sanding, sawing, grinding, drilling and
other construction activities contains chemicals known to the State of California
to cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products,

and arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as dust masks that are
specially designed to filter out microscopic particles.

WARNING: Handling the power cord on corded products may expose you to
lead, a chemical known to the State of California to cause cancer and birth
defects or other reproductive harm.

Wash hands after handling.

WORK AREA

Keep your work area clean and well lit. Cluttered work benches and dark work
areas may cause accidents or injury.

Do not operate power tools in explosive areas, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite
the dust or fumes.

Keep bystanders, children and visitors away while operating a power tool.
Distractions can cause you to lose control.

ELECTRICAL SAFETY

Do not abuse the cord. Never use the cord to carry the tool, pulling or unplug-
ging the power tool. Keep the cord away from heat, oil, sharp edges, or mov-
ing parts. Replace damaged cords immediately.
Damaged cords may create
a fire.

Damaged or entangled cords increase the risk of electric shock.

A battery operated tool with integral batteries or a separate battery pack
must be recharged only with the specified charger for the battery.
A charger
that may be suitable for one type of battery may create a risk of fire when used with
another battery.

Use battery operated tool only with specifically designated battery pack. Use of
any other batteries may create risk of fire.

Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with grounded power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges
and refrigerators.
There is an increased risk of electric shock if your body is
grounded.

Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.

When operating a power tool outdoors, use an extension cord suitable for
outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric
shock.

4

Advertising