KLH MUSICDOCK KS-600 User Manual

Page 5

Advertising
background image

5


Thank you for purchasing the musicdock

 by KLH model KS-600 AM/FM

executive shelf system with CD player, dock for iPod, and remote control. With
proper care this system should provide many years of reliable operation.

UNPACK and verify that all accessories are present. Here is what is included:

1. The main unit
2. Two speakers
3. iPod dock w/ adjustable support
4. AM Loop antenna
5. Base for AM loop antenna
6. FM wire antenna
7. 3.5 mm to 3.5 mm interconnect cable
8. Remote control
9. Battery for remote control (may be installed)
10. This instruction booklet


PREPARING THE KS-600 FOR USE

Unroll the wire from the right speaker. Grip the side of the
wire that is marked with a dashed line. Depress the R+
(red) thumb tab and insert the bare wire end into the oval
hole. Release the thumb tab to complete the connection.
Connect the unmarked side of the R speaker wire to the
black R terminal. Similarly, connect the left speaker to the
left speaker terminals. The speaker terminals are
identified as (30) on the control and feature identification
drawing.

If you will be using the KS-600 with an iPod, insert the
plug at the end of the dock cable into the socket (27) on
the right side of the KC-600. DO NOT twist the plug to
achieve alignment, as this WILL damage the plug. This
dock only needs to be connected if you will be using an
iPod with the KS-600.

Install the CR2032 “coin” cell BATTERY in the
remote control. To do accomplish, press down
and pull back to remove the battery compartment
cover. Insert the battery with the large smooth
surface marked with a + up as shown in the photo.
Replace the cover.

Replace this battery when the remote’s operating
range deteriorates.

Advertising