Using the ke-8 with non-docking devices, Using the ke-8, Charging your ipod – KLH MUSICDOCK KE-8 User Manual

Page 5

Advertising
background image

Using the KE-8

To open the KE-8, grip the unit as shown. Press
outward with the right hand and pull in with the left.
Simultaneously, swing the speakers open and into
the operating position.

If you are not using battery power, connect the
adapter (10) to the power jack (5) and plug the
adapter into a power outlet.

Turn on the power switch (4). Notice that the blue
light (8) comes on.

Use your thumbnail to grip the underside of the iPod dock tray. Move it forward
to the stop.

Mount your iPod on the KE-8 and initiate play using the controls on the iPod.

Increase the volume to the desired level by pressing the top portion of the
volume control (6).

To turn the KE-8 off, slide the power switch (4) to the off position. Remember to
turn off your iPod or any device connected to the line-in jack (7).

Charging your iPod

Note: Docking iPods will only be charged when the KE-8 is powered from the

AC Adapter. (Except iPod Shuffle and 3

rd

Generation iPod)

Using the KE-8 with non-docking devices

The KE-8 can be used with any device that has a headphone output. Use the
supplied interconnect cord (11) to connect the “Line in” jack (7) to the headphone
output of the source that you wish to listen to through the KE-8.

Suitable sources are small TVs, laptop computers, generic MP3 players, non-
docking iPods, portable CD players, and headphone radios.

Advertising