Recording (analog input), Analog recording, Preparation – Kenwood DM-9090 User Manual

Page 26: Adjust the settings if required, Select analog or mono

Advertising
background image

DM-9090 (En)

26

Adjust the settings if required.

1

2

1 Switch the REC MODE on.

2 Select the setting adjustment mode.

3 Set the selection (by pressing the JOG

DIAL).

Go to step

2 if setting adjustments are not

required.

The input jacks connected with audio cords accept analog signals. This unit records the analog signal from the REC IN jacks by
converting it into digital signal. (This recording is simply referred to as analog recording.)

Recording (ANALOG input)

÷ MONO cannot be selected during recording pause.

÷ The REC INPUT cannot be changed during pause in the MONO mode.

÷ The analog “monaural long-play mode”allows to double the recording

time compared to recording in the stereo mode.

Preparation

Each press switches the mode.

1 REC MODE : off
2 REC MODE : on (“D.REC LEVEL?” displayed.)

Select ANALOG or MONO.

Each press switches the mode.

1 ANALOG : Analog “stereo mode”
2 DIGITAL 1 : Coaxial input mode
3 DIGITAL 2 : Optical input mode
4 DIGITAL 3 : Coaxial input mode
5 MONO

: Analog “monaural long-play mode”

“ANALOG” lights up

1 Open the write protect tab of the Mini

Disc to make it recordable.

7

2 Load the Mini Disc.

3 Check the remaining recording time.

o

4 Set the amplifier’s input selector to the

source to be recorded.

The modes are switched by rotating the JOG DIAL.

1 D. REC LEVEL?

: Digital recording level setting.

2 AUTO TIME?

: Setting of the time for detecting a no-sound

blank section during automatic track num-

ber marking.

3 AUTO LEVEL?

: Setting of the level for detecting a non-

sound blank section during automatic track

number marking.

4 FADE TIME?

: Setting of the fading time in fade-in and

fade-out.

5 REC

= WRITING? : Setting of the UTOC writing after recording.

÷ The “D.REC LEVEL” and “FADE TIME” settings are not used during

analog source recording.

ANALOG recording

÷ For details on the setting adjustment modes, see “REC MODE key”.

¢

OVER (

dB)

R

L

A N A L O G

15

9

12

7

5

1

3

40

30

21

18

0

SEARCH

PGM

MONITOR

ANALOG

32kHz

2

1

3

48kHz

44.1kHz

DIGITAL

REC MODE

/CHARA.

4

¢

U P

DOWN

PUSH SET

JOG DIAL

4

¢

U P

DOWN

PUSH SET

JOG DIAL

REC INPUT

Advertising