Kompernass KH 6511 - Manual (Page 10)

- 8 -
6.5. Connection via VGA
This connection variant is only possible with very high grade
televisions, LCD/Plasma screens or Video projectors For this
connection variant the television must be equiped with a
VGA input and two unoccupied audio cinch sockets. Check
with the instruction manual of the corresponding playback
device to see if this connections variant is available. It is possible
that additional playback device settings must be implemented.
For this connection variant you will need:
• an audio cinch cable (not supplied)
• a VGA cable (not supplied) These can be obtained from
your dealer.
In order to connect the DVD player via VGA…
• Connect the jack inscribed with VGA using a VGA cable to
the corresponding socket on the television.
• Secure both plugs of the VGA cable with the screws.
• Insert the white audio cinch cable plug into the cinch socket
inscribed "L" on the rear panel of the DVD player.
• Then insert the white plug at the other end of the audio
cinch cable into the left channel audio socket on the tele-
vision.
• Insert the red audio cinch cable plug into the cinch socket
inscribed "R" on the rear panel of the DVD player.
• Then insert the red plug at the other end of the audio cinch
cable into the right channel audio socket on the television.
• For playback select the matching channel on your television
Check with the television's instruction manual on how
you can set the AV channel.
• In the OSD menu select the menu Video/Video
output/VGA.
Ô
On this topic see also capital 8.3
"Video settings: Video output.
7. Connecting audio components to the DVD player
Besides sound replay of DVDs, VCDs/S-VCDs and from Audio
and MP3-CDs via…
• the loud speaker of the television, to which the DVD player is
connected sound replay can also be produced via external
Audio components such as HiFi systems, Dolby Digital/DTS
receiver or Surround Sound systems.
You have the following options here:
7.1. Connecting a HiFi system
In order to enjoy a full sound experience when playing DVDs
with the DVD player you can connect a HiFi system to the
player. Before connecting check with the HiFi system's instruction
manual to verify...
• if the HiFi system is suitable for connection to a DVD player.
If yes…
• if the HiFi system is equiped with cinch sockets; if yes, you
can connect the HiFi system to the DVD player via cinch cables.
In order to connect a HiFi system...
• Insert the white cinch cable plug into the cinch socket
inscribed "L" on the rear panel of the DVD player.
• Then insert the white plug at the other end of the cinch
cable into the left channel cinch socket on the HiFi system.
• Insert the red cinch cable plug into the cinch socket inscribed
"R" on the rear panel of the DVD player.
• Insert the red plug at the other end of the cinch cable into
the right channel cinch socket of the HiFi system.
• Check with the instruction manual which settings on the
HiFi system may be necessary in order to reproduce sound
via the HiFi system during the playback of a DVD, VCD/
S-VCD, Audio or MP3 CD from the DVD player.
NOTE:
For an optimal sound experience place your HiFi system's
loud speakers to the left and to the right of the television,
on which you connected the DVD player.
If you connected the DVD player to the television via a Scart
cable the Audio signal will be transmitted via the cinch cable
to your HiFi system as well as via the Scart cable to the television.
In this case, set the volume of the television to the lowest level.
KH 6510/6511
KH6510_11_A4_V3_EN.qxd 24.08.2006 12:25 Uhr Seite 8