Computer/connectivity problems – Kodak DX7440 User Manual

Page 51

Advertising
background image

Troubleshooting

www.kodak.com/go/support

45

Computer/connectivity problems

You cannot take a
picture

■

Turn the camera off, then on again.

■

Depress the shutter button all the way (

page 7

).

■

Insert a charged battery (

page 2

).

■

Wait until the ready light is green before attempting to
take another picture.

■

Transfer pictures to the computer (

page 42

), delete

pictures from the camera (

page 30

), switch image storage

locations (

page 23

), or insert a card with available

memory (

page 6

).

■

If the camera is in Favorites mode, turn the Mode dial to a
different mode.

If...

Try one or more of the following

The computer does
not communicate with
the camera

■

Turn on the camera.

■

Insert a charged battery (

page 2

).

■

Make sure the USB cable is securely connected on the
camera and the computer port (

page 42

).

■

Make sure the EasyShare software is installed (

page 35

).

NOTE: This camera is not supported by Mac OS 8.6 or 9.x. You may

capture pictures on a card, then use a card reader to transfer
them to the computer.

Slide Show does not
run on an external
video device

■

Adjust the camera Video Out setting (NTSC or PAL,

page 25

).

■

Make sure the external device settings are correct (see the
device’s user’s guide).

If...

Try one or more of the following

Advertising