Kenwood KVT-739DVD - Manual (Page 11)

English | 11
Installation on Toyota Car using Brackets at Holes shown by "●"
2. Bend each end of case to fix the bracket.
1. Mount the bracket at each side.
Accessory ! (M5x6mm)
Accessory ! (M5x6mm)
Screws (included in
audio unit package)
Screws (included in
audio unit package)
Car Bracket
or
When using the bracket shown above, you cannot use screws at two holes of
the right and left unit sides.
Use a flat-blade screwdriver or pliers, and bend
each case tab into the hole of installation
bracket to fix the bracket.