Kathrein Euroline UFE 370/S - Manual (Page 20)

Installation Menu
20
Installation Menu
Adapting the receiver to your reception system:
1) Antenna setting
Antenna 5V supply (on/off) option
2) Scan
Auto Scan (full scan), Net Scan (network scan), TP Scan
(specific channels) and PID Scan (search for a specific
channel by its PID).
3) System Setup
Adapt to your TV set; additional customisation settings or reset
to factory defaults: You can restore the factory default settings
with which your receiver was shipped.
Important! This action will cancel all the changes you have made to your
receiver's setup.
4) Parental Control
Block menu access and password change
Note: The receiver is pre-programmed and shipped with an installation
menu protected by the default password "0000".