Konica Minolta Printer Copier - Manual (Page 134)

8 Error Displays and Other Indicators
8-6 Konica 7115/7118
<2nd Tray>
The same procedure applies when loading paper in the 3rd Tray, 4thTray, and 5th Tray.
1 Slide out the 2nd Tray.
2 Press down on the Paper Lifting Plate until it clicks into
the locked position.
3 Load the paper in the tray so that the front side of the
paper (the side facing up when the package was
unwrapped) faces up.
? Have you loaded too much paper in the tray?
➜ Do not load so much paper that the top of the stack is
higher than the
Ä mark.
4 Slide the Edge Guide and Trailing Edge Stop against the
edges of the paper stack.
? Do you know the special precautions to be used when
loading paper?
➜ Be sure that the Edge Guide and Trailing Edge Stop
are pressed tightly up against the edges of the paper
stack.
5 Slide the tray back into the copier.
Paper Lifting Plate
Konica7115_7118.book Page 6 Friday, October 19, 2001 12:02 PM