Kenwood Axcess Remote Portal - Manual (Page 8)

Setting Up and Configuring Your Axcess
2 Complete Guide to Your Axcess Remote Portal
Resetting Axcess
If Axcess fails to respond to front panel or remote commands, or if it responds erroneously, reset it:
1. Hold the
POWER ON
button down on the remote control until the Standby, MUSIC, NET RADIO, AUX and
OG lights flash momentarily. Then release the POWER ON button.
2. When the Standby light stays lit, press the POWER ON button on the remote or the POWER button on the front
panel to turn Axcess on.
How Do I Connect Axcess to Entré and the Internet?
Because Axcess is designed to play back content MP3s from Entré or Internet Radio via Entré, you must connect
Axcess to Entré, either via a common telephone line or directly. Since Axcess connects to the Internet through
Entré, the way you set up Entré’s Internet connection affects how Internet Radio works on Axcess. There are two
ways to connect Entré to the Internet:
• Dial-up, via Entré’s internal modem
• Broadband (through DSL, a cable modem, or other high-speed connection)
To learn more about connecting Entré to the Internet, see “How Do I Connect My Entré to the Internet?” on
page 17 of How to Connect and Set Up Your Entré Entertainment Hub.
Because there are many different ways to set up a home network, the following connection
diagrams only show the most common ways to connect Axcess and Entré.
Do not plug Axcess’ power cord into a wall outlet until you have completed all the
connections.
Establishing a Connection via Dial-Up
If you use a dial-up connection for Entré, you will not be able to listen to Internet Radio on Axcess. All of Axcess’
other functions will operate normally. Connect the components according to the following illustration:
Entré Dial-Up Internet Connection