Connection, English, Bridged connections – Kenwood PS520 User Manual

Page 6: Rca cable ground lead terminal, Line in terminal * line out terminal, Power control terminal, Terminal names

Advertising
background image

6

English

Connection

30

30

LEFT

BRIDGED

SPEAKER
OUTPUT

RIGHT

POWER IN

P.CON

BATT.

GND

FUSE(30Ax2)

ON

OFF

INFRASONIC

FILTER

LPF

OFF

HPF

B.M.S.

+12dB

OFF

REMOTE

OPERATION

MONO(L ch)

STEREO

GND

LINE OUT

EXT.AMP.CONT.

LINE IN

L

R

L

R

!

@ # $

%

^

(

& *

! Fuse (30 A

× 2)

@ Battery terminal

# Ground terminal

% Speaker output terminals

• Stereo Connections:

When you wish to use the unit as a stereo
amplifier, stereo connections are used.
The speakers to be connected should
have an impedance of 2

Ω or greater.

When multiple speakers are to be
connected, ensure that the combined
impedance is 2

Ω or greater for each

channel.

• Bridged Connections:

When you wish to use the unit as a high-
output monaural amplifier, bridged
connections are used. (Make connections
to the LEFT channel

9 and the RIGHT

channel

· SPEAKER OUTPUT terminals.)

The speakers to be connected should
have an impedance of 4

Ω or greater.

When multiple speakers are to be
connected, ensure that the combined
impedance is 4

Ω or greater.

The rated input of the speakers should be no
less than the maximum output of the
amplifier. Otherwise malfunction may result.

^ RCA cable ground lead terminal

When using an RCA cable with a ground
lead attached, connect the ground lead to
this terminal.

& LINE IN terminal

* LINE OUT terminal

The signal that’s input from the line input
terminal is output.

$ Power control terminal

Controls the unit ON/OFF.

Controls the unit power. Be sure to connect it
with all the systems.

( EXT.AMP.CONT. (external

amplifier control) terminal

Controls the B.M.S. Only Kenwood center
unit models sold in 1999 or later with a
"EXT.CONT."/"EXT.AMP.CONT." wire
attached can be used.
Also, a maximum of 3 power amplifiers can
be operated at the same time.

There are cases when operation may not be
possible due to wiring wire type and length.

NOTE

NOTE

2CAUTION

Terminal names

Advertising