Krups KB790 - Manual (Page 14)

English
CAUTION: USE EXTREME CAUTION WHEN
HANDLING BLADE ASSEMBLY. BLADES ARE
EXTREMELY SHARP!!
■ Wash the locking ring base, blade assembly, and seal carefully by hand
with warm water and gentle dishwashing liquid, then dry before
re-assembling to the blender jar.
TROUBLESHOOTING
Problem: Cause: Solution:
Blender does not
work.
Blender is unplugged Plug in the blender
The blender jar is not
properly assembled or
positioned on the base
Confirm that the blade
assembly is properly
assembled to the blen-
der jar, and that the jar
is correctly positioned
in the base.
Excessive vibration
The blender is placed
on an uneven surface.
Place on a flat surface.
The blender jar is not
properly positioned on
the base.
Confirm that the jar is
correctly assembled
and positioned in the
base.
Blender jar contents
leaking from lid.
Maximum capacity ex-
ceeded
Note maximum levels
as follows
- 60 oz for thick mix-
tures
- 50 oz for very liquid
mixtures
- 6 to 8 ice cubes for
ice crush
Blender lid is not pro-
perly locked in place. Lock the blender lid in
place before blending.
11