Features of the peh 900, Guide handle / planing depth adjuster, Dust outlet – Kompernass PEH 900 User Manual
Page 8: Vee groove, Planing depth scale, Base plate, On/off switch, Cutting block / planer blades, Drive interrupt, Safety cover
PEH 900 POWER PLANER
for planing, bevelling and rebating of wood, plastic and metall
Dear Customer, We are delighted that you have decided to purchase our high quality PEH 900 power planer.
Please make sure you familiarise yourself fully with the way the equipment works before you use it for the first time and that you understand
how to handle electrical power tools correctly. Please read the operating instructions below and the accompanying safety advice
carefully. Use the equipment only as described and for the indicated purposes. By doing this you will be able to work in complete safety
and produce better results. We hope you enjoy using your planer.
FEATURES OF THE PEH 900
³
Guide handle / planing depth adjuster
·
Dust outlet
º
Vee groove
»
Planing depth scale
¾
Base plate
¿
ON/OFF switch
µ
Cutting block / planer blades
´
Drive interrupt
¸
Safety cover
²
Side fence
¹
Dust channel
¶
Toothed belt cover
Ƹ
Rebating depth stop
TECHNICAL INFORMATION
Nominal power:
900 W
Nominal voltage:
230 V ~ 50 Hz
Weight:
3,6 kg
No load speed:
no 11,000 rpm
Sound pressure level:
0
87 dB (A)
Planing depth:
0 -
0
3.5 mm
Sound power level:
100 dB (A)
Rebating depth:
0 - 24.0 mm
Vibration:
2,5 m/s
2
(hand-arm vibration)
Planing width:
82 mm
Protection class:
II /
IMPORTANT SAFETY ADVICE
ƽ
̅
To be read in conjunction with the advice in the accompanying booklet on safety before using for the first time.
̅
The PEH 900 power planer is intended to be used for planing wood (e.g. beams, boards).
̅
If the mains cable is damaged or cut through during the work - never touch the cable - pull out the mains plug immediately. Never use electri
cal equipment with damaged cables.
̅
For operating the planer for longer periods and particularly if dust that may be hazardous to heath is created, the planer should be connected
to a suitable external vacuum device. Wear a dust mask.
̅
Make sure you only use sharp blades.
̅
Always keep the power cable fed to the rear of the machine.
̅
Never plane over metal objects, nails or screws.
ƽ
Ɓ
8
╞