Kyocera NS-L37Q-10A - Manual (Page 9)

channels.
o If you are using cable connected directly to the TV, you need to scan for
channels.
 To scan for channels:
1. Press MENU. The on-screen menu opens with the
Picture menu displayed.
2. Press ◄ or ► to highlight the CHANNELS. The
Channels menu opens.
3. Press ▼ to highlight Auto Channel Search, then
press OK/ENTER or ► to open the Auto Channel
Search screen.
4. Press ▼ to highlight Cable, then press OK/ENTER to
start the scan. You can see the search progress and
how many channels are found in the on-screen menu.
After the scan is complete, the menu closes and your
TV tunes to the first channel in the channel list.
o If you are using an antenna, you need to scan for channels.
 To scan for channels:
1. Press MENU. The on-screen menu opens with the
Picture menu displayed.
2. Press ◄ or ► to highlight the CHANNELS. The
Channels menu opens.
3. Press ▼ to highlight Auto Channel Search, then
press OK/ENTER or ► to open the Auto Channel
Search screen.
4. Press ▼ to highlight Antenna, then press OK/ENTER
to start the scan. You can see the search progress and
how many channels are found in the on-screen menu.
After the scan is complete, the menu closes and your
TV tunes to the first channel in the channel list.
12. I am missing channels or a single channel.
 Try entering the channel manually using the number keypad on your remote.
 Make sure the channel is not hidden. Channels can be deleted from the channel
list so that when you press channel up or down it will skip the hidden channels.
o To unhide a channel:
1. Press MENU. The on-screen menu opens with the Picture menu
displayed.
2. Press ◄ or ► to select CHANNELS. The Channels menu
opens.
3. Press ▼ to highlight Add/SKIP, then press OK/ENTER or ► to
open the Channel Lists screen.
4. Press ▲ ▼ ◄ or ► to highlight the channel you want to unhide,
then press OK/ENTER. If the channel has a check mark next to
it, the channel is in the channel list.
5. Press EXIT to close the menu.
 Are you using a cable/satellite box, cable connected directly to the TV, or an
antenna?
o If you are using a cable or satellite box you must use the remote that
came with that box to change channels.
1. Make sure you have the correct input selected to view channels
via the cable or satellite box. For example, if the cable or
satellite box is connected via component cables press the COMP
button on your remote to select Component to view your
channels.
2. Reception can vary by channel depending on the broadcast
9