Kensington Notebook AC/DC Power Adapter Portable 120-Watt AC/DC Power Supply - Manual (Page 4)

Auto Connection
The Notebook AC/DC Power Adapter’s auto connector can be used in any
vehicle with a 12-volt DC cigarette lighter socket, such as a car, truck, boat, or
an airplane equipped with this type of power socket.
CAUTION: To prevent power interruption and any negative effects on the device
or its software, don’t start your vehicle’s engine while the adapter is connected
to the device.
1. Remove the vehicle’s cigarette lighter from its socket.
WARNING: A cigarette lighter could be hot and burn your skin or flammable
materials. Allow the lighter to cool completely before storing it.
2. Insert your adapter’s auto connector into the cigarette lighter socket.
3. If power to the cigarette lighter socket is not already on, remove the adapter
from the socket and start the vehicle’s engine. Then repeat step 2. The
adapter’s status light glows green when powered.
4. Connect the appropriate tip to the adapter output cable and plug it into your
notebook computer.
The device’s battery will start to charge. Turn on and use your device.
Getting Connected
1. Connect the correct tip to the adapter output cord.
2. Insert the adapter output cord into the device’s power socket.
3. Follow the instructions on the following pages to connect to a cigarette
lighter or airline in-seat power outlet.
AC Wall Socket Connection
Use the AC wall socket connection anywhere a 100–120 volt or 200–240 volt
50/60Hz AC power source is available.
1. Connect the power tip to the adapter output cable and your notebook
computer, if you haven’t done so already.
2. Connect the AC wall socket input cable to the adapter.
3. Plug the AC connector into a wall outlet or power strip.
When the adapter has power, its status light glows green. Your devices’ battery
is now charging.
Your device is now powered.
Notebook AC/DC Power Adapter • 7 6 • Notebook AC/DC Power Adapter
33197_Notebook_ACDC 11/23/04 1:37 PM Page 6