Kenwood KVT-839DVD - Manual (Page 67)

English 67
Software Information
Checks the software version of this unit.
1 Display the Software Information screen
Touch [Software Information] in the SETUP
Menu (page 62).
1
2
1 Displays the software version.
2 Returns to the original screen.
System Setup
You can set up the system parameters.
1 Display the System SETUP screen
Touch [System SETUP] in the SETUP Menu
(page 62).
2 Setup each item
System SETUP
CD Read
Beep
Scroll
Remote Sensor
On Off
On Off
Auto Manual
1
1
1
5
2
3
4
1 Turns the key touch tone On or Off. ( On)
2 Allows scrolling of text display on the
Source Control screen. ( Manual)
"Auto": Scrolls the screen automatically.
"Manual": Allows you to scroll the screen
manually.
3 Selects a remote control signal. ( On)
When turned "Off", the remote control of TV
reception is rejected.
4 Sets a music CD playback. ( 1)
"1": Automatically recognizes and plays
back an Audio file disc, a DVD or a
music CD.
"2": Forcibly plays back a disc as a music
CD. Select "2" if you wish to play a
music CD having a special format or
if you cannot play a disc in the "1"
position.
5 Return to the original screen.
⁄
• You cannot play an Audio file/VCD disc in the "2"
position. Also, you may not play some music CDs in the
"2" position.
• Your setup is disabled when the disc is being played.
System SETUP
2
Key illumination color
Green
Display illumination color
Blue
6
8
7
6 Select an illumination color of receiver
buttons. ( Green)
"Green": Green
"Red": Red
7 Select an illumination color of the Sub
Display. ( Blue)
"Blue": A blue color display.
"Key Sync": The same color as the this unit
buttn illumination color.
8 Return to the original screen.