Kawasaki J5248 - Manual (Page 10)

J5248pr-0920 10
• Before applying the labels, wipe the surface of the vehicle with a
clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations. For best
results, avoid repositioning a label once it has been applied to the
vehicle.
• After applying a label, rub the label firmly with a clean, dry cloth to
make sure the label is adhered to your vehicle.
Start at the center of a label, and smooth towards the outer edges
to remove air bubbles.
®
®
®
DECORATION
LEFT SIDE VIEW
FRONT VIEW
1
2
3
4
5
6
7
8
SIDE VIEW
10
3
9
• First, insert the tab on the front of the seat into the slot toward the
front end of the vehicle A .
• Then, insert and “snap” the tab on the rear of the seat into the slot
in the rear of the vehicle B.
Rear Tab B Front Tab A
LEFT SIDE VIEW 13
• Insert two #10 x 1" screws into the clip and tighten.
12