Samsung NX-308 User Manual

Page 51

Advertising
background image

line, trunk group, or Speed-Dial number whenever the station goes off-hook. A
hot line delay time of 1 to 9 seconds can be programmed to allow sufficient time
to make a different call.

➥

MMC 25 HOT/WARM LINE

IN GROUP / OUT OF GROUP

Individuals assigned to a station hunt group may temporarily remove their
telephones from the group by pressing the IOG button. Stations out of a group
will not receive calls to that group but will continue to receive calls to their
individual extension numbers. When desired, the user may put him/herself back
into the group by pressing the button again. Users who do not have this button
may dial an access code.

➥

MMC 70 DIAL NUMBERING PLAN

IOG: 53

➥

MMC 71 SYSTEM KEY PROGRAMMING

➥

MMC 72 STATION KEY PROGRAMMING

INCOMING CALL DISTRIBUTION

Incoming calls can be assigned to ring a distributed station hunt group. This will
allow all members of the group to share the call load.

➥

MMC 35 ASSIGN STATION GROUP

➥

MMC 43 ASSIGN TRUNK RING

INCOMING / OUTGOING SERVICE

Programming allows any outside line to be used for incoming calls only, outgoing
calls only, or both.

➥

MMC 31 EXT/TRK USE

INDIVIDUAL LINE CONTROL

Each station in the system can be programmed to allow or deny dialing out.
Each outside line may be programmed to allow or deny answering.

➥

MMC 31 EXT/TRK USE

LIVE SYSTEM PROGRAMMING

The system can be programmed from any display keyset without interrupting
normal system operation. There are three levels of system MMC programming:
Technician, Customer, and Station.

➥

MMC 20 OPEN PROGRAMMING

➥

MMC 21 CHANGE PASSCODE

TECHNICIAN LEVEL

The Technician level has access to all programs via the Technician

NX-SERIES

HYBRID KEY SYSTEM

FEATURES SECTION

3 - 8

Advertising