Kompernass KH 525 - Manual (Page 13)

- 9 -
Warning: Risk of injury! Due to the
sharp cutting blades and the glass
mixing unit proceed with great care.
˼ Remove the measuring cap from the
lid and place the mixing unit on the
lid, so that the underside is facing
upwards.
˼ Insert the locking snibs of the measu-
ring beaker in the rabbets of the
locking ring on the underside of the
mixing unit.
˼ Turn the measuring beaker counter-
clockwise.
˼ Remove the locking ring.
˼ With great care remove the cutters
and the sealing washer.
Danger of Injuries: Clean the cutters very
carefully. They are very sharp.
After Cleaning
˼ Replace the sealing washer, the cut-
ters and the locking ring to their
positions.
˼ Insert the locking snibs on the measu-
ring beaker in the rabbets of the
locking ring on the underside of the
mixing unit.
˼ Turn the measuring beaker clockwise,
so that the locking ring once again
sits firmly on the mixing unit.
˼ The mixing unit can again be uptur-
ned and the measuring beaker placed
onto the lid.
Disposal
Do not dispose of the device in
normal domestic waste.
Dispose of the device over a registered
waste disposal firm or through your
communal waste disposal facility.
Observe the currently valid regulations.
In case of doubt, consult your waste di-
sposal facility.
Information
Service
Please refer to the guarantee card for
the Authorized Service Outlet in your
country.
Kompernaß GmbH
Burgstrasse 21
44867 Bochum
Deutschland / Germany
www.kompernass.com
Subject to technical changes.
KH 526
KH525_IB_UK 06.07.2006 10:16 Uhr Seite 9