Kodak EASYSHARE CD24 - Manual (Page 43)

Troubleshooting
www.kodak.com/go/support 37
Computer/connectivity problems
Direct printing (PICTBRIDGE enabled printer) problems
You cannot take a
picture ■ Turn off the camera, then turn on the camera.
■ Depress the Shutter button all the way ( see page 4 ).
■ Insert a new/charged battery ( see page 1 ).
■ Memory is full. Transfer pictures to the computer ( see page 32 ),
delete pictures ( see page 18 ), or insert another card.
Cannot find the
desired picture/video ■ To view pictures on a card or in internal memory, see page 17 .
Status Solution
Slide Show does not
run on an external
display device ■ Adjust the camera Video Out setting to NTSC or PAL ( see
page 30 ).
■ Make sure the external device settings are correct (see the user
guide for the device).
Computer does not
communicate with
the camera ■ Turn off the camera, then turn on the camera.
■ Make sure the battery is charged and installed correctly ( see
page 1 ).
■ Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and the computer (
see page 32 ), then
turn on the camera.
■ See KODAK Software Help at www.kodak.com/go/camerasw .
Status Solution
Cannot print to a
PICTBRIDGE Printer ■ In the Setup menu, change the Computer Connection setting to
Other Application (
see page 31 ).
Status Solution