Konica Minolta 130C - Manual (Page 41)

41 Continued on next page.
3. Press the adjust (ADJ) button or zoom lever
to change the blinking item.
• The numerals continues to change as long as the
button is held down.
• Pressing the W side of the zoom lever counts down,
the T side counts up.
4. Repeat steps 2 and 3 until all items in the
date and time display are correct.
5. Press the date button to set the date and
time.
• The camera will return to the shooting mode
automatically after five seconds. Pressing the date
button again or pressing the shutter-release button
partway down will also return the camera to the
shooting mode.
ADVANCED OPERATION