Kodak PLAYSPORT Zx3 User Manual

Page 19

Advertising
background image

Appendix

www.kodak.com/go/playsportsupport

19

The camera will not float. Use the strap at all times.

If water has entered the camera, remove the battery/card. Allow all components to
air-dry for at least 24 hours before using the camera.

If the camera was used in chemically treated water or saltwater, rinse it in fresh water,
then use a soft towel to dry it.

Wipe off dirt or sand from the door seals—debris could compromise the seal and cause
a leak in water.

Do not subject the camera to temperatures lower than 0 (32

° F) or higher than 40° C

(104

° F) for an extended time—the integrity of the seals may be compromised. Wait

until camera reaches operating temperature before using.

Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions unless
designed specifically for camera lenses. Do not allow chemicals, such as suntan lotion,
to contact painted surfaces.

Service agreements may be available in your country. Contact a dealer of KODAK
Products for more information.

For camera disposal or recycling information, contact your local authorities. In the US,
go to the Electronics Industry Alliance Web site at

www.eiae.org

or go to Kodak at

www.kodak.com/go/support

.

Limited Warranty
Kodak warrants its digital cameras and accessories (excluding batteries) to be free from
malfunctions and defects in both materials and workmanship for the warranty period
specified on your KODAK Product packaging. Retain the original dated sales receipt. Proof of
purchase date is required with any request for warranty repair.
Limited warranty coverage
Warranty service is only available from within the country where the products were originally
purchased. You may be required to ship products, at your expense, to the authorized service
facility for the country where the products were purchased. Kodak will repair or replace
products if they fail to function properly during the warranty period, subject to any conditions
and/or limitations stated herein. Warranty service will include all labor as well as any
necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a
product, Kodak will, at its option, refund the purchase price paid for the product provided
the product has been returned to Kodak along with proof of the purchase price paid. Repair,
replacement, or refund of the purchase price are the sole remedies under the warranty. If
replacement parts are used in making repairs, those parts may be remanufactured, or may
contain remanufactured materials. If it is necessary to replace the entire product, it may be
replaced with a remanufactured product. Remanufactured products, parts and materials are
warranted for the remaining warranty term of the original product, or 90 days after the date
of repair or replacement, whichever is longer.
Limitations
This warranty does not cover circumstances beyond Kodak’s control. This warranty does not

Advertising