Konica Minolta Image Controller IC-205 - Manual (Page 29)

4 Installing the printer driver
4-2 IC-205
Ins
tal
ling t
he p
ri
n
te
r
dr
iv
er
Ch
apte
r 4
4 Installing the printer driver
This section describes the procedure for installing the printer driver. The
printer driver can be installed in two ways: by using “Plug and Play” or by us-
ing the “Add Printer Wizard”.
2
Note
If the machine is to be connected to a USB port, install the printer driver
by using Plug and Play.
If the machine is to be connected to a parallel port, install the printer driv-
er by using the Add Printer Wizard.
For network printing, use the “Add Printer Wizard” to install the printer driver.
During installation, select “LPT1” as the printer port.
For details on specifying network connection settings, refer to the User’s
Guide for the Network Interface Card.
2
Note
In order to use IPP (network) printing, the IPP printing settings must be
specified when the printer driver is installed. For details on specifying the
IPP printing settings, refer to the manual provided with the network inter-
face card.
If the image controller is used on Windows 98, Windows 98 SE or Win-
dows Me, the Network Setup utility cannot be used.
Connection
Method Compatible Operating
Systems Printer Driver Installa-
tion Follow this procedure:
USB port
connection Windows XP, Windows
Server 2003, Windows
2000, Windows Me, and
Windows 98 SE Install using Plug and
Play. “Installing the TWAIN
driver/printer driver us-
ing “Plug and Play”” on
page 4-4
Parallel port
connection Windows XP, Windows
Server 2003, Windows
2000, Windows NT 4.0,
Windows Me, Windows
98 SE, and Windows 98 Install using the Add
Printer Wizard. “Installing the printer
driver using the “Add
Printer Wizard”” on
page 4-9