Konica Minolta Image Controller IC-205 - Manual (Page 57)

5 Configuring printer driver settings
5-16 IC-205
Conf
igu
ri
n
g
pr
in
ter
dr
iv
er
s
e
tt
ing
s
Cha
p
ter 5
5.3.3 Paper Source
Use the settings in this group box to specify the source for the printing paper.
Paper Source List
Click the down arrow button, and then select the tray from which paper
should be fed.
Available settings: Auto, Tray 1, Tray 2-Tray 5(option), Bypass
2
Note
If the optional paper feed unit is installed, “Tray 2-Tray 5” appears. For
details, refer to ““Device Options” tab” on page 5-28. In addition, only
plain paper can be loaded into tray 2-tray 5.
Tray 2 through tray 5 do not support the following paper sizes.
Paper sizes: Hagaki, Env. Com10, Env.C6, Env. C6 Envelope, Env. DL,
Env. You-1, Env. You-4, Env. You-6
Selecting “Auto” tells the machine to use the tray that contains paper of the
size specified under
Output Paper Size on the “Paper” tab.