Konica Minolta Image Controller IC-205 - Manual (Page 59)

5 Configuring printer driver settings
5-18 IC-205
Conf
igu
ri
n
g
pr
in
ter
dr
iv
er
s
e
tt
ing
s
Cha
p
ter 5
5.3.4 Media type
Use the settings in this group box to specify the paper media type for the
printing paper.
Media Type List
Click the down arrow button, and then select the type of media to be used
for printing.
Available settings: Plain Paper, Thick Paper, OHP, Envelope
2
Note
If “Auto” or “Tray 2-Tray 5” (option) is selected in the Paper Source list,
the only Media Type setting available is “Plain Paper”.
5.3.5 Duplex
2
Note
The “Duplex” option can be used only if the 180/210 is equipped with the
optional automatic duplex unit.
Click the down arrow button, and then select the settings for duplex (two-
sided) printing.
If “Off” is selected, the printer does not print on both sides of the paper.
When duplex printing is selected, select “Long Edge” or “Short Edge” for the
binding position.
2
Note
The automatic duplex unit is required in order to use duplex printing. In
addition, the “Duplex” option must be added to the list of installed op-
tions in the “Device Options” tab for the printer driver. When using duplex
printing, select “Plain Paper” as the media type.