Kawasaki Rechargeable Jumpstarter 840095 User Manual

Page 9

Advertising
background image

ACCESSORIES

Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.

Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.

If you must use an extension cord, be sure that the gauge is large enough to carry
the amount of current necessary for your power tool.
If not, your tool may experi-
ence a loss of power, excessive voltage drop or overheating. The smaller the gauge
number, the heavier the cord (see table below).

RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS

TOOL CURRENT RATING

CONDUCTOR SIZE IN A.W.G

AMPERE

10FT.

25FT.

50FT.

100FT.

3-6

18

18

18

18

6-8

18

18

18

16

8-10

18

18

18

14

10-12

16

16

14

14

12-16

14

12

12

-

16-20

12

12

12

-

SPECIFICATIONS

SPECIFICATIONS

Internal Battery

12V/18AH

Jumpstart Current

350A (instant)

Air Compressor Pressure

250PSI

OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS

Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would
like further information on the following products, please contact Alltrade Customer
Service Department at 1-800-590-3723.

Cordless Drills/Screwdrivers

Impact Wrenches

Sanders

Jigsaws

Circular Saws

Angle Grinders

INFLATION USING A NOZZLE
1. Select the proper nozzle for the

job.

2. Push the adapter into the con-

nector and lock into place with
the thumb lock.

3. Insert the adapter into the item

you wish to inflate. Remember
that most sports items inflate
very quickly.

4. Turn on the compressor

switch.

MAINTENANCE AND CLEANING

DO NOT incinerate used batteries. Batteries will explode

if exposed to intense heat or flame.

ALWAYS cover exposed terminals with heavy-duty electrical tape before disposal.
Unprotected terminals may short out and cause fire or personal injury.

This sealed lead-acid battery is recyclable. Please take used batteries to a city
battery drop-off center, lead-acid battery retailer or other battery recycling location.

15

5. When the item is

inflated, turn off the
compressor.

6. Pull out the adapter.

7. Store hose and

nozzles.

Reciprocating Saws

Routers

Rotary Tools

Corded and Cordless Multi-Purpose Tools

Wide Range of Accessories and more

Advertising