Configuring the printer 96 – Konica Minolta Magicolor 5430 DL User Manual
Page 102
Configuring the Printer
96
IP Address*
Sets the printer’s IP address.
Range:
0–255 for each xxx triplet
Default:
192.168.1.2
"
If the IP address is outside the range, the following
message displays when you choose the Apply
button: “Please enter a correct address.” Click OK
button, and then type an appropriate number.
Configuration Menu Equivalent:
NETWORK/IP ADDRESS
Subnet Mask*
Sets the printer’s subnet mask address.
Range:
0–255 for each xxx triplet
Default:
255.255.255.0
"
If the subnet mask address is outside the range, the
following message displays when you choose the
Apply button: “Please enter a correct address.”
Click OK button, and then type an appropriate
number.
Configuration Menu Equivalent:
NETWORK/SUBNET MASK
Default Gateway* If a router is used on the network, sets the router’s
address.
Range:
0–255 for each xxx triplet
Default:
192.168.1.1
"
If the router address is outside the range, the
following message displays when you choose the
Apply button: “Please enter a correct address.”
Click OK button, and then type an appropriate
number.
Configuration Menu Equivalent:
NETWORK/GATEWAY
RAW Port
Number
Identifies the number of the printer’s RAW port.
Choices:
Non-configurable
Default:
9100
Apply button
Applies the configuration settings for this window.
Item
Description