Kodak 8660 - Manual (Page 75)

Configuring for TCP/IP
Part No. 6B4389 June 1999 7-9
NOTE: If you do not have a router on the network, the IP address
must match the first three octets of the IP address of your
computer.
6. Click on OK, and then click on Close.
The new print server IP address should be listed and
highlighted as an available port.
7. Click on Next.
8. Select a printer driver, and click on Next.
NOTE: You can select any driver because it will be replaced with
the AdobePS driver after the LPR printer is established.
9. Select Keep Existing Driver.
10. Change the name of the printer, if desired, and/or set it as the
default printer. Click on Next.