Kaidan QPX-2 - Manual (Page 8)

Page - 8
Chapter 6
Using the QuickPan™
S
TORING THE PLUNGER AND FREE ROTATION
You may find that you don’t want or need to use the click-stops. In this case,
you can remove the spring plunger. When the plunger is removed it does not
engage the holes on the detent wheel.
In this configuration, the detent wheel will spin freely, and it can be locked
into any desired position by use of the Clamp knob, which protrudes from
the side of the base as shown below (lower).