Kyocera Rave K-7 - Manual (Page 9)

rëÉê=dìáÇÉ=Ñçê=hJT=o~îÉ=mÜçåÉë 1
1 G
ETTING
S
TARTED
Your phone comes with a removable lithium ion
(LiIon) battery. Fully charge the battery before
using the phone.
Installing the battery
1. Hold the phone facing away
from you.
2. Use your fingernail to pull
the circular latch toward the
bottom of the phone and
pull the battery door away.
3. Place the battery in the
phone casing with
the metal contacts
toward the top of
the phone.
4. Place the battery door notches in the openings near
the bottom of the phone.
5. Press the circular latch until
it clicks.
Charging the battery
You must have at least a partial charge in the battery to
make or receive calls.
To charge the battery, connect the
AC adapter to the jack on the
lower right side of the phone, then
plug the adapter into a wall outlet.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
• Charging (the icon is scrolling)
• Partially charged
• fully charged
Recharging the battery: You can safely recharge the
battery at any time, even if it has a partial charge.