Threading the film – Kodak HR 500 User Manual

Page 83

Advertising
background image

Using the Long Roll Accessory

August 2001

D-17

2. If you are using either thin reels or core only, install the flanges on the

spindles with the appropriate side up.

Threading the Film

1. Position the film with the data holes down and the emulsion toward the

imager.

NOTE: You can thread the film from either side of the Long Roll Accessory.

P192_1550BC

data holes

emulsion side

P192_1550BCA

Advertising
See also other documents in the category Kodak Photo Accessories: