Kodak EASYSHARE C1505 - Manual (Page 44)

38 www.kodak.com/go/support
Troubleshooting
Picture quality problems
Status Solution
Picture is not clear ■ Clean the lens ( see page 42 ).
■ Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■ Use a larger picture size ( see page 27 ).
■ If you’re manually adjusting the ISO speed, realize that high ISO
setting may cause grainy pictures (
see page 28 ).
Picture is too dark ■ Reposition the camera for more available light.
■ Use Fill flash ( see page 8 ) in Program mode, Backlight in SCN mode,
or change your position so light is not behind the subject.
■ Move so that the distance between you and the subject is within the
effective flash range. (See
Specifications, page 40 .)
■ In Program mode, increase the Exposure Compensation ( see
page 28 ).
Picture is too light ■ Reposition the camera to reduce the amount of available light.
■ Turn off the flash ( see page 8 ).
■ Move so that the distance between you and the subject is within the
effective flash range (see
Specifications, page 40 ).
■ In Program mode, decrease the Exposure Compensation ( see
page 28 ).