Your appliance at a glance using the cook top, Sensor sensivity reset, Switch on a cooking zone (stand-by-mode) – Kuppersbusch USA kc_906 User Manual

Page 5: The cooking setting, Cooking setting suitable for

Advertising
background image

KC 906.2 and EKE Users Guide USA

5

Your appliance at a glance

Using the cook top

[

Read the safety instructions!

Sensor sensivity reset

Important:
There must be no objects on the sensors while the sensor sensitivity is
being set.

F

After initial connection and after a power failure the abbreviations

'%0” appears briefly in the LED displays. Then rotating circles are dis-

played. This means that the sensors are being checked in a self-test and
at the same time the button sensitivity reset.

– Acknowledge this display by touching the Off-sensor.

Be sure that no objects are lying on the sensors! These symbols are
switched off immediately.

– Otherwise remove objects and disconnect the cooking zone again briefly

from the main power source.

Switch on a cooking zone (Stand-by-mode)

F

If you start to use a cooking zone, the cook top must be first set into the
stand-by mode before you can activate the cooking zone.

F

When you turn the cooking surface on, you will hear a short buzzing noise
as it heats. This is design-specific and does not affect the quality and
operation of the appliance.

– Press the sensor-button for

approx. 2 seconds.
The LED-display above the sen-
sor lights up and the appliance
is in operation (stand-by mode).

The stand-by mode automatically switches itself off,

– if no cooking zone is activated within 20 seconds (after 10 seconds an

acustic signal indicates that the appliance switches itself off after another
10 seconds)

or

– if the appliance is not used 1 minute after starting operation.

The cooking setting

You have 9 cooking settings available.

Select the required cooking setting with the plus- or minus-sensor. It will be
indicated in the display.

Using the minus-sensor, you start with a boost. If you use the plus-sensor,
you start without a boost.

EKE 854.1

EKE 804.2

EKE 604.2

1

Dual circuit cooking zone

2

Sensor buttons for cooking settings

3

Off-sensor

4

Stand-by-Sensor

5

Child proof lock (sensor-lock)

6

Normal cooking zone

7

Normal cooking zones, usably as a frying zone

8

Frying zone

KC 906.2

Cooking setting

Suitable for

1-3

Heating, warming, browning, defrosting

4-5

Steaming, poaching, boiling

6-8

Roasting, deep-frying

9

Heating large quantities

Advertising