Kohler Toilet Seat with Bidet Functionality K-4709 - Manual (Page 2)

Technical Information
Fixture:
Configuration
20 psi (1.38 bar) - 80 psi
(5.52 bar)
Electrical rating 120 VAC / 60 Hz / 1260 W
Power cord length 46 ″ (1.17 m)
A dedicated circuit protected with a Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device
(RCD) is required.
Installation Notes
Install this product according to the installation guide.
14-9/16"
(370 mm)
4-7/8"
(124 mm)
2"
(51 mm)
7/8" (22 mm)
11-1/16"
(281 mm)
16-3/8" (416 mm)
16-3/8" (416 mm)
20-1/4" (514 mm)
7-13/16"
(198 mm)
2" (51 mm)
6"
(152 mm)
Min
ELECTRICAL SERVICE DETAIL
REMOTE
32" (813 mm) R.
The receptacle should be located at least 6" (152 mm)
above the floor line, and within a 32" (813 mm) radius
measured 2" (51 mm) to the right of the toilet ledge, as
shown.
2"
(51 mm)
Product Diagram
C 3
TM
- 200
C 3
TM
- 200 TOILET SEAT WITH BIDET FUNCTIONALITY
Page 2 of 2
1054180-4-
B